Installation and Trim

Envue, Symmetrix and Standard FRP Panels are part of a complete system, including Trim and Base Molding, Outside Corner Guards, Adhesives and Silicone Sealants.

Simplified Installation FRP panels install easily and in a fraction of the installation time of ceramic tile.

FRP panels can be easily
cut with shears or a carbide tip saw.

Apply Marlite Brand Adhesive to the back of panels and apply them to a subwall.

Adhesives

C-375 Adhesive-Size: 3.5 gallon can
Adv Polymer Panel Adhesive-Size: 3.5 gallon can
C-551 Adhesive-Size: 3.5 gallon can

Sealants

MS-250 Clear Size: 10 oz. cartridge
MS-251 White Size: 10 oz. cartridge
Color Matched Size: 10 oz. cartridge

Trowel size: 3/16” W x 1/4” D x 1/2” C-C notch

Division Molding Installation For wet environments, sealant is required in molding channels.

Adhere panel to subwall

Slide Division molding under edge of first panel

Staple Division molding to subwall along revealed edge

Adhere second panel in place and repeat

Seam Joint Installation Contact Marlite for complete instructions.

Place a 6 penny spacing nail between panels

After adhesive dries one hour, remove nail and protect face with tape.

Place a bead of harmonizing sealant in the gap.

Using your finger, place a slight indentation in the gap.

Remove tap to reveal a grooved and matched seam joint.

Trim Moldings

PVC Molding

M360
Outside Corner

M350
Inside Corner

M370
Edge

M365
Division

Harmonizing Aluminum

A560
Outside Corner

A551
Inside Corner

A570
Edge

A565
Division

Bright Anodized Molding

F561
Outside Corner

F550
Inside Corner

F570
Edge

F565
Division

Base Moldings, Cover Guards and Accessories

M612
Base

Length: 4” wide x 10’ long
Material: Rigid extruded PVC
Colors: P200 Black P203 Quarry Red

M 660 Outside
Corner

M 651 Inside
Corner

End Caps
M 625 RH End Cap
M 620 LH End Cap

Butt Joint connector
Included with Base
Molding strips

F 560SS
Stainless
Corner Guard

M 961
PVC Outside
Corner Guard

Length:    8’ and 10’ long
Material:  Stainless Steel or Rigid Extruded PVC
Colors:    Most standard Marlite FRP Colors
White, Natural Almond, Ivory*, Silver*, Light Grey*

* denotes 10’ length only

3/4" Drive Rivets
Amount: 100 per pack
Material:  Rigid Extruded PVC
Colors:    P100 White, P118 Almond